Experts in 3D technologies since 2012

3D Printer Formlabs Form Studio 1 Flex Graphite

48 210 ₴
Price with VAT
0811294039450
In Stock
00-00015439
Reviews: (0)
48 210 ₴
Printing technology LCD (MSLA)
Build volume (X×Y×Z) (mm) 200×125×235
Model Form Studio 1
UV wavelength (nm) 405
XY resolution (µm) 17 - 50
(see all)

3D Printer Formlabs Form Studio 1 Flex Graphite

Formlabs Form Studio 1 Flex Graphite — is an SLA 3D printer that first made professional-level resin printing accessible. Inside, a powerful long-lasting printing engine operates, and the system itself is built on an open platform. The printer prints the majority of parts in less than two hours, and lines and small elements remain extremely clear. The entire cycle from start to finish is safe, reliable, and leaves no mess.

Formlabs Form Studio 1 Flex Graphite — desktop SLA 3D printer with an orange protective cover

Key Features

  • Professional class at an affordable price. Form Studio 1 is the first professional-grade resin 3D printer available at a reasonable cost.
  • Powerful printing engine. The long-lasting engine ensures stable professional operation of the printer.
  • Open platform. The printer operates on an open platform.
  • Printing in less than two hours. Most models come out of the printer in this time.
  • Extraordinary clarity. Small elements and contours of parts are reproduced with high accuracy.
  • Build Platform Flex. Parts are removed from the print surface without tools in a matter of seconds.
  • Safe and clean process. From start to finish, the operation remains safe, reliable, and neat.
User opening the lid of the Formlabs Form Studio 1 Flex Graphite 3D printer before starting printing

Working Platform

  • Quick Release Technology. The Build Platform Flex allows you to quickly and easily remove parts from the print surface without tools — in a matter of seconds.
  • Recommended for almost all types of printing. Flex is suitable for almost any tasks you set for the printer.
  • Protection of parts and convenient process. The platform eliminates the risk of damaging the model during removal and simplifies the work.
Removal of the Build Platform Flex from the Formlabs Form Studio 1 Flex Graphite SLA 3D printer after printing is complete

Safety and Cleanliness

  • UL GREENGUARD Certification. In combination with Alpha Resins and Formlabs VOC Extractor, Form Studio 1 is the first and only resin printer with this certification for low chemical emissions.
  • Clean working cycle. The printer leaves no mess during operation.
Formlabs Form Studio 1 Flex Graphite SLA 3D printer next to resin cartridges and a printed car model

Specification

ParameterValue
Printing TechnologyMasked Stereolithography (MSLA)
Printer EngineLow Force Display™ (LFD)
Minimum Access Dimensions (W × D × H)36 × 33 × 79 cm
Printer Dimensions (W × D × H)34.2 × 31.5 × 50.2 cm
Printer Weight14.3 kg
Build Volume (W × D × H)200 × 125 × 235 mm
Parts taller than 215 mm require removing the resin tank along with the build platform. When using Form Wash, the basket must be removed. When using Form Studio Wash+Cure, parts taller than 200 mm must be removed from the platform before washing.
Z-Axis Accuracy (Layer Thickness)25 – 300 microns
XY Resolution35-micron pixel size with pre-tuned anti-aliasing
Optical Power Intensity6 mW/cm² (at the print plane)
Laser Wavelength405 nm
Resin Cartridges1
Resin Delivery SystemAutomatic
Biocompatible MaterialsNo
SupportsAuto-generated, easy to remove
Operating Conditions18 – 28 °C
Low ambient humidity
Operating TemperatureAutomatic resin heating up to 25 – 45 °C (depending on the material)
Temperature ControlDirect resin heating
Power Requirements100–240 VAC
Maximum 3 A
50/60 Hz
300 W
Connectivity InterfacesWi-Fi: 2.4, 5 GHz
Ethernet: 100 Mbps
USB: 2.0
Wi-Fi SpecificationsProtocols: IEEE 802.11 a/b/g/n/ac/ax
Frequency: 2.4 GHz, 5 GHz
Supported Security: WPA/WPA2
Ethernet SpecificationsRJ-45 Ethernet, 100BASE-TX LAN port
Connection with a shielded cable (not included): minimum Cat5.
USB SpecificationsUSB Type-C port (with USB C-A cable)
Printer ControlInteractive touchscreen
NotificationsTouchscreen alerts
SMS / E-mail via Dashboard platform
Buzzer for audio signals
Mobile push notifications via the Formlabs Form Mobile App
CameraBuilt-in camera, 1920 × 1080 resolution (2 MP)
Print PreparationPreForm software for PC
File TypesSTL, OBJ, 3MF and other CAD formats

Formlabs Form Studio 1 Flex Graphite 3D printer can be ordered from 3D Technologies with delivery across Ukraine. Place an order on the website or contact our specialists: they will help you choose the equipment, resins, and components for your tasks.

Key Parameters
Printing technology
LCD (MSLA)
Build volume (X×Y×Z) (mm)
200×125×235
Model
Form Studio 1
UV wavelength (nm)
405
XY resolution (µm)
17 - 50
Build volume class
Large (220+ mm)
Minimum layer height (µm)
25
Display
Yes
Print speed range (mm/h)
80 – 150
Air filter
No
Network
Wi‑Fi, Ethernet
Resin level sensor
Yes
AI monitoring
None
Certifications
Greenguard Gold, CE, FCC, UL
Resin type
General purpose, Impact resistant, High stiffness, Temperature Resistant, Flexible, Specialty, Casting, Dental, Medical, Engineering, Jewelry, Ceramic-filled
Open resin system
Included
Dimensions netto (mm)
342×315×502
Weight netto (kg)
14.3
Reviews
0/ 5
average product rating
0
0
0
0
0
There are no reviews for this product. Be the first to leave your review.

No questions about this product, be the first and ask your question.

Related Products